4-Bit Bidirectional Voltage-Level Shifter with Auto Direction Sensing and Protect TXB0104RGYR

short description:

TXB0104RGYR level translator with a 3-state output, this is power management at its best. This level shifter has a minimum operating temperature of -40 °C and a maximum of 85 °C.

Send email to us Download Datesheet

Product Detail

Product Tags

Product Attributes

TYPE	ILLUSTRATE
category	Integrated Circuits (ICs) logic Converters, alignment shifters
manufacturer	Texas Instruments
series	-
wrap	Tape and rolling packages (TR) Insulating tape package (CT) Digi-Reel®
Product status	Active
Converter type	Voltage level accuracy
Channel type	bidirectional
Number of circuits	1
Number of channels per circuit	4
Voltage - VCCA	1.2 V ~ 3.6 V
Voltage - VCCB	1.65 V ~ 5.5 V
Input signal	-
Output signal	-
Output type	Tri-state, non-inverting
Data Transfer Rate	100Mbps
Operating temperature	-40°C ~ 85°C (TA)
peculiarity	Automatic direction sensing
Installation type	Surface adhesive type
Package/Housing	14-VFQFN bare pad
Vendor component encapsulation	14-VQFN (3.5x3.5)
Product master number	TXB0104

Product Introduction

This device is fully specified for partial power-down applications using I OFF. The I OFF circuitry disables the outputs, which prevents damaging current backflow through the device when the device is powered down.

Product Features

1.2-V to 3.6-V on A port and 1.65-V to 5.5-V on B port (VCCA ≤ VCCB)
VCC isolation feature: if either VCC input ss at GND, all outputs are in the high-impedance state
Output enable (OE) input circuit referenced to VCCA
Low power consumption, 5-μA maximum ICC
I OFF supports partial power-down mode operation
Latch-up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22 – A Port:
2500-V Human-Body Model (A114-B)
1500-V Charged-Device Model (C101) – B Port:
±15-kV Human-Body Model (A114-B)
1500-V Charged-Device Model (C101)